How To Configure An Ip Camera

Configuring a photographic camera to obtain an IP address will enable it to get an IP accost automatically from a DHCP server.   Assigning a static IP accost on the camera is very useful especially if you want to access information technology remotely.  This can also prevent IP address conflicts on your network.

This article will guide you on how to configure the IP address for your camera.

Step 1:
Open a web browser like Internet Explorer then enter the camera'south IP accost in the Address bar.

NOTE: To know the IP address of your photographic camera, click here.

Step 2:
Enter your camera's User proper name and Password then click OK.

Annotation:  The default User name and Password is admin.  However, if you accept changed the User name and Password during the initial setup, you demand to use them instead.

Footstep three:
Click the Setup tab.

Step 4:
Click Basic located at the left side of the page.

Step v:
Select the Configuration Type.

• Obtain Accost Automatically (DHCP) – gets IP accost from the camera automatically
• Fixed IP Address – specific IP Address, Subnet Mask, Gateway, Chief DNS and Secondary DNS are assault the photographic camera.

Make sure that the IP Address that you volition exist assigning to the photographic camera has the aforementioned first three (3) set of numbers equally of the Default Gateway.  The Default Gateway is the IP accost of the router.  For instructions on getting the default gateway'south IP address, click hither.  The Main DNS and Secondary DNS should be the aforementioned with your network.  For instructions in getting the DNS for your network, click here.

Related Article:

 Checking the devices connected to the router using the DHCP Client Tabular array

Source: https://www.linksys.com/us/support-article?articleNum=135406

Posted by: harrisonourch1959.blogspot.com

Share this post